Ipharamitha
| Ipharamitha/imodeli | X(I)N-3 | X(I)N-10×32 | X(S)N-20×32 | X(S)N-35×32 | X(S)N-55×32 | |
| Umthamo opheleleyo | 8 | 25 | 45 | 80 | 125 | |
| Umthamo wokusebenza | 3 | 10 | 20 | 35 | 55 | |
| Amandla emoto | 7.5 | 18.5 | 37 | 55 | 75 | |
| Ukuthambeka kwamandla emoto | 0.55 | 1.5 | 1.5 | 2.2 | 2.2 | |
| I-engile yokuthambeka (°) | 140 | 140 | 140 | 140 | 140 | |
| Isantya seRotor (r/min) | 32/24.5 | 32/25 | 32/26.5 | 32/24.5 | 32/26 | |
| Uxinzelelo lomoya ocinezelweyo | 0.7-0.9 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Umthamo womoya oxinanisiweyo (m/min) | ≥0.3 | ≥0.5 | ≥0.7 | ≥0.9 | ≥1.0 | |
| Uxinzelelo lwamanzi okupholisa irabha (MPa) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Uxinzelelo lomphunga weplastiki (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Ubungakanani (mm) | Ubude | 1670 | 2380 | 2355 | 3200 | 3360 |
| Ububanzi | 834 | 1353 | 1750 | 1900 | 1950 | |
| Ubude | 1850 | 2113 | 2435 | 2950 | 3050 | |
| Ubunzima (kg) | 1038 | 3000 | 4437 | 6500 | 7850 | |
| Ipharamitha/imodeli | X(S)N-75×32 | X(S)N-95×32 | X(S)N-110×30 | X(S)N-150×30 | X(S)N-200×30 | |
| Umthamo opheleleyo | 175 | 215 | 250 | 325 | 440 | |
| Umthamo wokusebenza | 75 | 95 | 110 | 150 | 200 | |
| Amandla emoto | 110 | 132 | 185 | 220 | 280 | |
| Ukuthambeka kwamandla emoto | 4.0 | 5.5 | 5.5 | 11 | 11 | |
| I-engile yokuthambeka (°) | 140 | 130 | 140 | 140 | 140 | |
| Isantya seRotor (r/min) | 32/26 | 32/26 | 30/24.5 | 30/24.5 | 30/24.5 | |
| Uxinzelelo lomoya ocinezelweyo | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Umthamo womoya oxinanisiweyo (m/min) | ≥1.3 | ≥1.5 | ≥1.6 | ≥2.0 | ≥2.0 | |
| Uxinzelelo lwamanzi okupholisa irabha (MPa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Uxinzelelo lomphunga weplastiki (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Ubungakanani (mm) | Ubude | 3760 | 3860 | 4075 | 4200 | 4520 |
| Ububanzi | 2280 | 2320 | 2712 | 3300 | 3400 | |
| Ubude | 3115 | 3320 | 3580 | 3900 | 4215 | |
| Ubunzima (kg) | 10230 | 11800 | 14200 | 19500 | 22500 | |
Isicelo :
Lo matshini unenkqubo yokulawula ipneumatic, inkqubo yokufudumeza / yokupholisa, inkqubo yokuthamba, i-rotor, ukuxhathisa ubushushu, inkqubo ephambili yokuqhuba, igumbi lokuxuba, i-rotor, isixhobo sokumisa uthuli, njl.Isetyenziselwa ukwenza iplastiki, ukuxuba kunye nerabha yokuxuba okokugqibela, iiplastiki okanye umxube weplastiki kunye nerabha.
1. Inkqubo yokulawula umoya ilawulwa ngumyalelo we-PLC.Isilinda somoya esinamacala amabini senza inkunzi yegusha inyuke okanye ihle, ukuba kunokwenzeka ukugcwala kakhulu kwigumbi lokuxuba, inkunzi yegusha ephezulu inokunyuswa ngokuzenzekelayo okanye ngesandla ukuba kuyimfuneko, ukuze ikhusele imotor ekulayisheni.
2.Umatshini wokuthamba uquka i-brake motor, i-colloidal gear reducer, uhlobo lwe-TP worm kunye negiya le-worm njl.Iyakwazi ukuvuselela igumbi lokuxuba kwisihloko nge-140 malunga ne-rotor yangaphambili
I-3.rotor shaft iphiko lomzimba phezulu kunye nekona yephiko lidityaniswe phezulu kunye ne-alloy resistant alloy.Umphezulu we-rotor shaft, udonga lwangaphakathi lwegumbi lokuxuba, umphezulu wenkunzi yegusha kunye nomnye umphezulu odityaniswe nesitokhwe ziyaqiniswa okanye zipolishwe kwaye zityatyekwe nge-chrome eqinile, okanye zidityaniselwe ukunxiba i-alloy welding ekwaziyo ukumelana ne-alloy, ngoko ke ziyanxitywa kwaye ziyakwazi ukumelana nomhlwa.
I-4.rotor shaft yesakhiwo esidityanisiweyo somzimba wephiko le-rotor elidityaniswe kwi-shaft enesithukuthezi, ngoko iphucula amandla kunye nokuqina kwe-rotor.I-rotor yephiko langaphakathi lomzimba womgxobhozo unokufakwa kumanzi okupholisa okanye ukufudumeza umphunga
5..igumbi lokuxuba luhlobo lwebhatyi isakhiwo esingenanto.Inkunzi yegusha ephezulu ingumgongxo ukunyusa indawo yokupholisa okanye yokufudumeza kunye nefuthe lokulawula ubushushu
6.inkqubo yokuqhuba ephambili inenjini ephambili, isinciphisi, ukudibanisa i-gearbox odd-speed kunye nobuso ngobuso ukujikeleza kweerotors kuphunyeziwe.
I-7.inkqubo yokulawula umbane ithatha isixhobo se-PLC esingeniswe ngaphandle.Onke amacandelo e-elektroniki angeniswa kumazwe angaphandle okanye iimveliso zobuchwepheshe bokwazisa, ukuphucula ukuthembeka kwenkqubo.
Iinkcukacha zeMveliso:
1. I-Dispersion Kneader Machine rotor ifakwe kwi-alloy chromium enzima, unyango lokucima kunye nepolishwa, (i-12-15 layers).
2. Igumbi lokuxuba i-Dispersion Kneader Machine liqukethe i-W-shape body welded kunye neepleyiti zentsimbi ezikumgangatho ophezulu kunye neziqwenga ezimbini zecala.Igumbi, i-rotors kunye ne-piston yenkunzi yegusha zonke zibume obufakwe ibhatyi ukwenzela ukungena komphunga, i-oyile kunye namanzi okufudumeza kunye nokupholisa ukuze zihambelane neemfuno ezahlukeneyo zenkqubo yokuxuba kunye neplastiki.
I-3.I-Dispersion Kneader Machine Motor, i-reducers ithatha i-tooth surface gear eqinile, enomsindo ophantsi kakhulu kwaye inokugcina i-20% yombane okanye amandla kwaye inobomi obude benkonzo - iminyaka engama-20.
4. Inkqubo yokulawula ye-PLC ithatha iMitsubishi okanye i-Omron.Amalungu ombane athatha i-ABB okanye i-US Brand.
5. Uxinzelelo lwe-hydraulic tilting mechanism kunye nenzuzo yezixhobo zokukhupha ngokukhawuleza kunye ne-140 angle tilt.
6. I-Chamber ivalwe kakuhle nge-arc-shaped-plate-groove uhlobo lwesakhiwo se-labyrinth kunye ne-shaft end ye-rotor ithatha uhlobo loqhagamshelwano olungenayo i-lubricating kunye nesakhiwo sokuqina kwentwasahlobo.
7. Ubushushu bulawulwa kwaye buhlengahlengiswa ngenkqubo yokulawula umbane.
8. Inkqubo ye-pneumatic inokukhusela i-motor ekonakalisweni ngenxa yokugqithiswa kwegumbi.
9. Bonke oomatshini bethu banewaranti yeminyaka emithathu.Sinikezela ngeyona nkonzo ilungileyo emva kwentengiso efana noqeqesho lwe-line, uncedo lobugcisa, ukugunyaziswa kunye nokugcinwa konyaka.
