Siga
| Siga/samfuri | X(S) N-3 | X(S) N-10×32 | X(S) N-20×32 | X(S) N-35×32 | X(S) N-55×32 | |
| Jimlar girma | 8 | 25 | 45 | 80 | 125 | |
| Ƙarar aiki | 3 | 10 | 20 | 35 | 55 | |
| Ƙarfin mota | 7.5 | 18.5 | 37 | 55 | 75 | |
| Karfin motsin motsi | 0.55 | 1.5 | 1.5 | 2.2 | 2.2 | |
| Kwangilar karkata (°) | 140 | 140 | 140 | 140 | 140 | |
| Gudun rotor (r/min) | 32/24.5 | 32/25 | 32/26.5 | 32/24.5 | 32/26 | |
| Matsi na matsa lamba iska | 0.7-0.9 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Ƙarfin matsewar iska (m/min) | ≥0.3 | ≥0.5 | ≥0.7 | ≥0.9 | ≥1.0 | |
| Matsin ruwan sanyaya don roba (MPa) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Matsin tururi don filastik (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Girman (mm) | Tsawon | 1670 | 2380 | 2355 | 3200 | 3360 |
| Nisa | 834 | 1353 | 1750 | 1900 | 1950 | |
| Tsayi | 1850 | 2113 | 2435 | 2950 | 3050 | |
| Nauyi (kg) | 1038 | 3000 | 4437 | 6500 | 7850 | |
| Siga/samfuri | X(S) N-75×32 | X(S) N-95×32 | X(S) N-110×30 | X(S) N-150×30 | X(S) N-200×30 | |
| Jimlar girma | 175 | 215 | 250 | 325 | 440 | |
| Ƙarar aiki | 75 | 95 | 110 | 150 | 200 | |
| Ƙarfin mota | 110 | 132 | 185 | 220 | 280 | |
| Karfin motsin motsi | 4.0 | 5.5 | 5.5 | 11 | 11 | |
| Kwangilar karkata (°) | 140 | 130 | 140 | 140 | 140 | |
| Gudun rotor (r/min) | 32/26 | 32/26 | 30/24.5 | 30/24.5 | 30/24.5 | |
| Matsi na matsa lamba iska | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Ƙarfin matsewar iska (m/min) | ≥1.3 | ≥1.5 | ≥1.6 | ≥2.0 | ≥2.0 | |
| Matsin ruwan sanyaya don roba (MPa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Matsin tururi don filastik (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Girman (mm) | Tsawon | 3760 | 3860 | 4075 | 4200 | 4520 |
| Nisa | 2280 | 2320 | 2712 | 3300 | 3400 | |
| Tsayi | 3115 | 3320 | 3580 | 3900 | 4215 | |
| Nauyi (kg) | 10230 | 11800 | 14200 | 19500 | 22500 | |
Aikace-aikace:
Wannan inji kunshi pneumatic kula da tsarin, dumama / sanyaya tsarin, karkatar da tsarin, na'ura mai juyi, thermal juriya, main tuki tsarin, hadawa jam'iyya, na'ura mai juyi, kura tasha na'urar, da dai sauransuAna amfani da shi don yin gyare-gyare , haɗawa da haɗuwa na ƙarshe na roba , robobi ko haɗuwa da robobi da roba
1. Ana sarrafa tsarin kula da pneumatic ta umarnin PLC.Silinda iska bi-directional yana sanya ragon sama ko ƙasa, idan abin da ya wuce kima ya faru a cikin ɗakin hadawa, ana iya ɗaga ragon ta atomatik ko da hannu idan ya cancanta, don kare motar daga yin nauyi.
2.Tilting inji kunshi birki motor, colloidal gear reducer, TP irin tsutsa da tsutsa kaya da dai sauransu.Yana da ikon kunna ɗakin haɗakarwa zuwa taken ta 140 a kusa da na'ura mai juyi na gaba
3.rotor shaft reshe jiki saman da reshe kusurwa suna welded sama da lalacewa resistant gami.na'ura mai juyi shaft surface, da hadawa jam'iyyar ciki bango, babba rago surface da sauran surface alaka da stock suna taurare ko goge da plated da wuya Chrome, ko welded sama sa resistant gami waldi, don haka suna sa resistant da lalata resistant.
4.rotor shaft ne na integral tsarin rotor reshe jiki welded a kan gundura shaft, don haka yana inganta ƙarfi da stiffness na na'ura mai juyi.Za a iya sanya ramin jikin reshe na rotor ta cikin ruwan sanyi ko dumama tururi
5..mixing chamber ne jaket irin m tsarin.Rago na sama yana da rami don haɓaka wurin sanyaya ko dumama da tasirin sarrafa zafin jiki
6.main tuki tsarin ya ƙunshi babban mota, reducer, haɗa gearbox m-gudun da fuska da fuska juyawa na rotors an cimma.
7.electrical tsarin kula da na'urar PLC da aka shigo da shi.Ana shigo da duk abubuwan haɗin lantarki ko samfuran fasahar gabatarwa, don haɓaka amincin tsarin.
Cikakken Bayani:
1. Watsawa Kneader Machine na'ura mai juyi yana da mai rufi da wuya chromium gami, quenching jiyya da goge, (12-15 yadudduka).
2. Watsawa Kneader Machine hadawa dakin kunshi W-siffar jiki welded tare da high quality karfe faranti da guda biyu na gefe faranti.Daki, rotors da piston ram duk suna da jaketed tsarin don shigar da tururi, mai da ruwa don dumama da sanyaya don dacewa da buƙatu daban-daban don aiwatar da hadawa da filastik.
3.Dispersion Kneader Machine Motor, reducer rungumi dabi'ar taurare hakori surface kaya, wanda yana da sosai low amo da kuma iya ajiye 20% lantarki ko iko da kuma yana da dogon sabis rayuwa - 20 shekaru.
4. PLC kula da tsarin rungumi dabi'ar Mitsubishi ko Omron.Abubuwan lantarki suna ɗaukar ABB ko Alamar Amurka.
5. Na'urar karkatar da matsa lamba na hydraulic tare da amfani da kayan fitarwa da sauri da kusurwar 140 tilt.
6. Chamber an rufe shi da kyau ta hanyar tsarin nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i) nau'i-nau'i-nau'i-nau'i-nau'i-nau'i-nau'i-nau'i-nau'i-nau'i na labyrinth da shaft karshen na'ura mai juyi rungumi dabi'ar lamba irin non-lubricating tare da spring tightening tsarin.
7. Ana sarrafa zafin jiki da daidaitawa ta hanyar tsarin kula da wutar lantarki.
8. Tsarin pneumatic zai iya kare motar daga lalacewa saboda overloading na ɗakin.
9. Dukkanin injunan mu suna garanti na shekara ɗaya zuwa uku.Muna ba da mafi kyawun sabis na tallace-tallace kamar kan horo na layi, taimakon fasaha, ƙaddamarwa da kulawa na shekara-shekara.
