Rubber Sheet water cooling unit line hanging type
MACHINE CAN BE CUSTOMIZED
Parameter for rubber sheet cooling line
Model |
XPG-600 |
XPG-800 |
XPG-900 |
||
Max. rubber sheet width |
mm |
600 |
800 |
900 |
|
The thickness of the rubber sheet |
mm |
4-10 |
4-10 |
6-12 |
|
Rubber sheeting temperature over room temperature after cooling |
°C |
10 |
15 |
5 |
|
Linear speed of taking-in conveyor |
m/min |
3-24 |
3-35 |
4-40 |
|
Linear speed of sheet hanging bar |
m/min |
1-1.3 |
1-1.3 |
1-1.3 |
|
Hanging height of the sheet hanging bar |
m |
1000-1500 |
1000-1500 |
1400 |
|
Number of cooling fans |
pc |
12 |
20-32 |
32-34 |
|
Total power |
kw |
16 |
25-34 |
34-50 |
|
Dimensions | L |
mm |
14250 |
16800 |
26630-35000 |
W |
mm |
3300 |
3400 |
3500 |
|
H |
mm |
3405 |
3520 |
5630 |
|
Gross weight |
t |
~11 |
~22 |
~34 |
Application :
Main function of the batch off cooling machine is to cool rubber strip coming either from two-roll mill or from roller-die calender and stacking of cooled rubber sheet on palette.
Rubber sheet comes into the batch-off unit entry (dip tank/soaking bath), where separation solution is applied, then is cooled in cooling tunell, captured by gripping equipment and pulled on the feeding conveyor. Feeding conveyor moves cooled rubber sheet through cutting equipment onto stacking equipment. Cooled rubber sheet is put on palette in wig-wag stacking or by plates. When given weight or height of stacked rubber sheet is achieved, full palette is replaced by empty one.