OEM/ODM China Tire Making Machine - Inner tube curing press – Ouli Detail:
Parameter
| Items | LLN-25/2 |
| Vulcanized inner tire specification | 28’’ below |
| Maximum clamping force | 25T |
| Plate type hot plate outer diameter | Φ800mm |
| Boiler type hot plate inner diameter | Φ750mm |
| Height of applicable mold | 70-120mm |
| Motor power | 7.5kw |
| Hot plate steam pressure | 0.8Mpa |
| Tire tube curing inner pressure | 0.8-1.0Mpa |
| External diameters | 1280×900×1770 |
| Weight | 1600kg |
Application
The machine is mainly used in vulcanizing cycle tube, bicycle tube and so on.
The mainframe mainly consists of the frame, the upper and lower hot plates, the central hot plate, the umbrella type base, the oil cylinder, the piston and so on. The oil cylinder is inside of the frame base.
The piston moves up and down in the oil cylinder.
It uses double edges dust ring and shaft sealing ring with YX section and shaft ladder ring to avoid leaking. The lower hot plate connects to the umbrella type base. And the piston pushes the base to move up and down. The central hot plate moves up and down in the frame guide rail with the help of the guiding wheel.
The upper hot plate is fixed on the frame beam. The mold closing action is finished by pushing the umbrella type base to jack up the hot plate.
The oil is discharged by the dead weight of the hot plate, base and piston decline when the mold is open.
Product detail pictures:
Related Product Guide:
OEM/ODM China Tire Making Machine - Inner tube curing press – Ouli, The product will supply to all over the world, such as: , , ,
By from -
By from -
