Factory Supply 75l Rubber Kneader - Column rubber vulcanizing press – Ouli Detail:
Parameter
|
Parameter/model |
XLB-DQ 350×350×2 |
XLB-DQ 400×400×2 |
XLB-DQ 600×600×2 |
XLB-DQ 750×850×2(4) |
|
Pressure (Ton) |
25 |
50 |
100 |
160 |
|
Plate size (mm) |
350×350 |
400×400 |
600×600 |
750×850 |
|
Daylight (mm) |
125 |
125 |
125 |
125 |
|
Daylight quantity |
2 |
2 |
2 |
2(4) |
|
Piston stroke(mm) |
250 |
250 |
250 |
250(500) |
|
Unit Area pressure(Mpa) |
2 |
3.1 |
2.8 |
2.5 |
|
Motor power(kw) |
2.2 |
3 |
5 |
7.5 |
|
Size (mm) |
1260×560×1650 |
2400×550×1500 |
1401×680×1750 |
1900×950×2028 |
|
Weight(KG) |
1000 |
1300 |
3500 |
6500(7500) |
|
Parameter/model |
XLB- 1300×2000 |
XLB- 1200×2500 |
XLB 1500×2000 |
XLB 2000×3000 |
|
Pressure (Ton) |
5.6 |
7.5 |
10 |
18 |
|
Plate size (mm) |
1300×2000 |
1200×2500 |
1500×2500 |
2000×3000 |
|
Daylight (mm) |
400 |
400 |
400 |
400 |
|
Daylight quantity |
1 |
1 |
1 |
1 |
|
Piston stroke(mm) |
400 |
400 |
400 |
400 |
|
Unit Area pressure(Mpa) |
2.15 |
2.5 |
3.3 |
3 |
|
Motor power(kw) |
8 |
9.5 |
11 |
26 |
|
Size (mm) |
2000×1860×2500 |
2560×1700×2780 |
2810×1550×3325 |
2900×3200×2860 |
|
Weight(KG) |
17000 |
20000 |
24000 |
66000 |
Application :
XLB series the plate vulcanizing press for rubber is the main molding equipment for various of rubber molding products and non-molding products, The equipment is also suitable for molding to Thermos setting plastic, bubble, resins, Bakelite, sheet metal, building materials and other molding products, with simple structure, high pressure, wide applicability, and high efficiency.
Flow of machine action
Initial state →Put the material into the mould, re-posit the ejector cylinder →Load the mould →Close the mould quickly→ Clamp the mould slowly, increase pressure →Exhaust→Vulcanization start →Vulcanization finish→Open mould quickly→ Pushing out the mould →Ejector cylinder works, and separate mould and product→Take out the product.
Main Features
1.The cylinder ( piston ) adopts the best seals structure , with reasonable design and reliable function. The seals part is good quality YX type polyurethane seals (not rubber seal ) ,which is oil resistant , aging resistant .Our machine adopts the double seals structure , and seals part is easy change and protect
2.Automatic control : automatic mold closing , automatic exhausting , automatic heating and keep stable temperature, automatically timing for vulcanization , automatic alarming , automatic mold opening ,etc
3..The vulcanizing temperature can be set and showed in the digital displan .
4.Vulcanizing time can be set in the PLC screen . If you want to heat and vulcanize for 1 minutes , just set it directly . When it reaches 1minutes ,machine will alarm then machine will open the mold automatically
5.Pillar is made of high quality # 45 steel, The hardness , wear resistance and abrasive resistance is high improved by quenching and tempering
6.The top beam and bottom plate form is welded with the good quality Q-235A ductile iron .After welding , it is also processed by the artificial vibration or high temperature aging treatment , to eliminate the internal stress and avoid the deformation
7.plunger is made of LG-P cold hard alloy steel . Surface of it owns high hardness and wear resistant.Depth of chilled layer is 8-15mm , hardness is HRC 60-70 , making the plunger own long life time
Product detail pictures:
Related Product Guide:
Factory Supply 75l Rubber Kneader - Column rubber vulcanizing press – Ouli, The product will supply to all over the world, such as: , , ,
By from -
By from -
